
 ^m╒════════════════════╤═══════════════════════════════╡^t Screen and colors ^m╞╕
 │^r Colors             ^m│                                                    │
 │ ^nAuto palette       ^m│ ^nColor  ^h0  ^nMono  ^h0                                  ^m│
 │ ^nWindows sound      ^m│ ^hOff                                                ^m│
 │ ^nExploding windows  ^m│ ^hOff                                                ^m│
 │ ^nDirect writes      ^m│ ^hYes                                                ^m│
 │ ^nSnow checking      ^m│ ^hOff                                                ^m│
 │ ^nScreen blanker     ^m│ ^h300                                                ^m│
 │ ^nShow snakes        ^m│ ^hOn                                                 ^m│
 │ ^nVGA Fadeout        ^m│ ^hOff                                                ^m│
 │ ^nCenter screen      ^m│ ^hOn                                                 ^m│
 │ ^nScreen size        ^m│ ^hAuto                            ^nAx   Bx   Cx   Dx  ^m│
 │ ^n├─Start mode       ^m│ ^hTseng 4000 100x40   ^nRegisters: ^h002A                ^m│
 │ ^n├─Other mode       ^m│ ^hXGA        132x25   ^nRegisters: ^h0014                ^m│
 │ ^n└─Exit  mode       ^m│ ^hReset       80x25   ^nRegisters: ^h0003                ^m│
 │ ^nBig phonebook      ^m│ ^hOff                                                ^m│
 │ ^nForce CP-850       ^m│ ^hOff                                                ^m│
 │ ^nFind textmodes     ^m│                                                    ^m│
 │ ^nUse intensity      ^m│ ^hOff                                                ^m│
 ╘════════════════════╧════════════════════════════════════════════════════╛^n

 ^hColors^n

  Define all colours used inside Terminate's menus.

  ^hPalette^n

   ^m╒═════╡^t Choose color palette ^m╞╕
   │^r Color 1                     ^m│
   │ ^nColor 2                     ^m│
   │ ^nColor 3                     ^m│
   │ ^nColor 4                     ^m│
   │ ^nColor 5                     ^m│
   │ ^nColor 6                     ^m│
   │ ^nLCD/composite/black & white ^m│
   │ ^nMonochrome                  ^m│
   │ ^nFlashy                      ^m│
   │ ^nPurple                      ^m│
   │ ^nIntense 1                   ^m│
   │ ^nIntense 2                   ^m│
   │ ^nIntense 3                   ^m│
   │ ^nBlind palette               ^m│
   ╘═════════════════════════════╛^n

   There are 14 predefined colour palettes - choose the one you like the
   most!. A colour palette is a complete set of colours that will be loaded
   into the default colour record, then you can change some of the colours
   again. If you are blind you should use the last palette, press END and
   return in this menu.
   The Intense requires that you have a graphic adapter that can show
   background color intense instead of blink/flash. (EGA,VGA etc.)

 ^hAuto palette^n

  At startup, test if colour or monochrome screen. You could enter a '1' at
  Color and a '8' at Mono, then if you start Terminate from a machine with a
  colour graphics card, then palette 1 will be choosen and if it has
  Hercules monochrome then palette 8 will be used. This is useful if you are
  on a network and want to use the same configuration.

 ^hWindows sound^n

  Make annoying sounds when popping in or out of windows.

 ^hExploding windows^n

  Try it! (Visual effect)

 ^hDirect writes^n

  Should always be turned ON (except in special cases) because using BIOS
  calls is MUCH slower than direct screen writes. Some blind people can
  benefit of using the 'Only menus' function. Which will use direct screen
  writes all other places than in terminal mode. It depends on which
  speech thing you use.

 ^hSnow checking^n

  When writing directly to the screen, then remove snow. Should only be
  turned on with old CGA cards, because it can slow down screen writes.

 ^hScreen blanker^n

  Blank screen after X seconds if nothing has happened. If you enter '0'
  here, then the screen would never blank out.

 ^hShow snakes^n

  When blanking screen, you could allow a lot of snakes to eat your screen.
  The number of snakes will be decided according to how big your screen is
  and how fast your machine is. If using a multitasker you should turn this
  off, since then all timeslices will be released.

 ^hVGA Fadeout^n

  Fade down colours on VGA and MCGA cards when leaving Terminate. Looks real
  nice, but not all VGA cards will support this.

 ^hCenter screen^n

  If you are using a screen size more than 80, lets say 132, and call a
  system that only uses 80 chars (most systems), then Terminate can center
  the screen for you. That means position 1 on the screen will be
  recalculated for all screen writes with (132-80)/2 = 26 as left margin.

 ^hScreen size^n
 ^h├─Start mode^n
 ^h├─Other mode^n
 ^h└─Exit  mode^n

  Screensize has 4 values, Auto, 25, 43/50 and Custom. Auto will just use
  whatever videomode is current. 25 will force 25 lines when starting and
  exiting Terminate. 43/50 will force 43/50 lines if you have a EGA or VGA
  card installed when starting or exiting Terminate. Custom will call the
  BIOS videomode routine with the parameters you give. In CUSTOM.DOC you
  will find the codes for several VGA cards. Start mode will then be used at
  startup or when returning from shell. Exit mode will be used when exiting
  Terminate or calling an external utility. If you do not want Terminate to
  change videomode, but always use some other kind of videomode (also when
  calling external utilities), just set the videomode before calling
  Terminate and set Screen size to Auto.

 ^hBig phonebook^n

  If ON, when entering the phonebook, Terminate will switch into 43/50 lines
  and back into 25 lines when exiting the phonebook.
  This should not be used together with custom screen size.

 ^hForce CP-850^n

  Use framechars only from Codepage 850. Only use this if your windows look
  funny and have strange characters in the frames.

 ^hFind textmodes^n

  Run an external program called SCANMODE (in UTILS\), which detects all
  textmodes your VGA card is able of showing. This information is saved
  in MODEINFO.DAT and can afterwards be imported by Terminate.
  You can also run this program manually directly from DOS.

 ^hUse intensity^n

  EGA and VGA cards have the possibility of using background intense colors,
  instead of blink/flash. This feature will be turned on/off automatically
  when you select a color palette.

